Building on a solid foundation of advanced products, Lectro is recognized with quality and consistent performance.

For more than two decades, Lectro Bar has continued to serve the Busduct industry and will continue to serve it well into the future.

Busduct requiring long life should be backed up by a long record of past achievements. As Lectro Bar has a 26 years record, do not hesitate to specify Lectro Bar when you need busducts.

Lectro Bar delivers impressive features and benefits that make it ideal for many types of industrial, commercial and residential applications.

Lectro Sandwich Busduct (LSB) gives you all the qualities you need in a high performance Busduct system.

LSB is a non ventilated design available from 630A up to 6400A.

LSB is the most versatile, compact Busduct design we have ever offered. It installs with minimum hardware and often costs less than cable and conduit installations.

Advantages:

• Busduct meet the requirement of IEC-439/1-2
• Tested and approved by different accredible laboratories
• Manufactured in an ISO 9001/2000 certified facility to ensure highest quality control
• Thirty years in the market
• Fully Type Tested at Kema testing facility in Holland

• High Conductivity better than 99.995%
• High purity better than 99.95%
• Surface Protection
• Good Contact

• No need to separate or flare the bars at the outlet
• High short circuit withstand for both feeder and plug-in
• Low impedance and low voltage drop
• No flame, smoke or gas propagation in the housing " Chimney effect"
• No heed to use fire barriers

High insulation tested at 2500 V for 1 minute

• Three insulation layers used
• A combination of electrostatic epoxy class B and Teflon coated fiberglass (5000V, non-flammable, 250"C working temperature
• For high ambient temperature or class H insulation required the epoxy is replaced by a layer of teflon coated fiberglass

• More than two tons pressure on overlapping busbars at each bolt
• Adjacent phases separated with non-flammable
• Fiberglass sheets (2 mm, 80kV/cm)
• Joint alignment with two bolts instead of one bolt in the single bolt to ensure correct installation even with non skilled labor
• 2-3 times higher contact surface at joint to eliminate any joint heating
  
  

• Integral casing ground as standard, 50% additional ground bar.
• 200 %(common used with discharge lamps and computer installations or high harmonics systems, 100% (Full), 50% (Half) neutral available.

Transformer box

• Enclose flexible joint and transformer bushing
• Protect the system from the entry of any foreign body
• Easy check on transformer oil leakage without de-energizing the system.

• Excellent heat dissipation (no air in the compact design, the heat can be transferred easily to the environment through the aluminum casing).
• Significant reduction in reactance and magnetic flux leakage
• Excellent ground return path
• Excellent water and dust protection

Space saving prefabricated accessories

• Corner elbows, tees, crosses, reducers etc.
• Maximum layout flexibility
• Optimum utilization of space

Five years Warranty

• Warranty extended to 15 years with our easy maintenance program
• Ask your local distributor for more details

Final Fit Program

• Manage the dimensional uncertainties in Busduct layout
• Fax the custom engineered piece to the factory and in 3-4 days we shipped it to you

• Quickest delivery to meet project requirement
• Accurate layout done by Lectro Group
• Detailed drawings in one week from receiving the order.

Tap-Offs

• A cover interlock to prevent opening the cover while the tap-off in the "ON" position.
• An ON/OFF handle mounted on Tap-Off to operate the breaker without opening the cover.
• A switch interlocks to prevent putting the device into operation when the cover is open.
• A safety interlock to prevent insertion or removal of the plug while in the "ON" position.